Digital-based Robotic Inspection

Next generation robotic inspections.
Without programming.

 

Digital-based Robotic Inspection
More than a solution.
A "digital mockup based" revolution

 

The Digital-based Robotic Inspection software suite makes the most out of the industrial digital mockup, via direct connection to information systems, to allow next generation robotic inspections. Integrable into various robotic platforms and various sensors, it allows fully automated and highly robust robotic controls. All without programming or complex manipulations.

Digital-based Robotized Inspection
Fully automated robotic inspections

Trajectory planning

Trajectory planning

  • Automatic choice of observation points according to the elements to be controlled
  • Optimized simulation and planning of robot paths avoiding collisions
Analysis and arbitration

Analysis and arbitration

  • Application of algorithmic operators based on the digital mockup using image (2D), digitization (3D) and CAD
  • Application of control operators based on learning (reference images, machine learning, deep learning ...)
  • Detection and characterization of nonconformities
Controlling and supervising

Controlling and supervising

  • Supervision of the progress of the control range
  • Automatic control of the robot, of all elements of the cell (racks, sensors ...) and of capture phases
  • Interaction with the supervision unit
Alerts and Reporting

Alerts and Reporting

  • Issuing alerts for intervention and corrective action
  • Generation of reports according to specific business rules

Digital-based Robotic Inspection
Always the best suited control

Leaning on a generic software suite integrating cutting-edge technologies, Digital-based Robotic Inspection adapts without specific development to various control sensors - 2D, 3D, multi-spectral, etc. - and various robots - cell, cobot, mobile, etc. It automatically detects a wide variety of defects using various methods.

Geometric controls

Geometric controls


Screw length

Presence / absence of pieces

Positioning of supports

Interference

Inversions

...

Colorimetric controls

Colorimetric controls


Object detection (e.g. flame)

Presence / absence of objects (washers, plugs...)

Marks

Painting areas

...

Recognition - reading

Recognition - reading


Texts (OCR)

Serial numbers

Nameplates

Datamatrix

Bar codes

Symbols, marks

...

Comparative analysis

Comparative analysis


Comparison by image recognition

Learning based on reference data

Machine learning

Deep learning

Image correlation

...

Robot-Human

Digital-based Robotized Inspection
Optimized robot-human collaboration

Designed for effective operational complementarity, Digital-based Robotic Inspection optimizes robot-human collaboration in industrial contexts.


Communication during operations

Digital-based Robotic Inspection immediately detects any anomaly based on the digital mockup (or compared to a reference base if there is no CAD) and therefore issues an alert to the users concerned (operators, production managers, controllers) for intervention / corrective action.

Interactive automated controls

The robotic control ranges created and planned by Digital-based Robotic Inspection can also be directly used for interactive automated controls by operators / controllers.

Customized control reports

Digital-based Robotic Inspection automatically generates customized control reports that are immediately accessible to users for analysis.

Digital-based Robotic Inspection
Numerous advantages

 

Time saving

Time saving

Time for the preparation, maintenance and evolution of the control ranges minimized

Agility

Agility

  • Adaptability to different control cells
  • Wide range of control features
  • Evolves synchronously with the prodcut mockup
  • Reliability

    Reliability

  • Robust controls
  • Always updated ranges
  • Immediate detection of anomalies
  • Efficiency

    Efficiency

  • Controllers focused on their expertise
  • Analysis and arbitration facilitated
  • Increased reactivity in case of anomaly
  • Traceability

    Traceability

    Customizable control reports generated automatically

    Cost saving

    Cost saving

    Low programming, maintenance and evolution costs

    Offered in this suite

     

    Plugin
    DiotaConnect

    DiotaConnect integrates into industrial IT systems to allow direct and bilateral data transfers between existing software (PLM, CAD, CRM, MES, ERP, etc.) and DiotaPlayer


    Learn more

    Software
    DiotaPlan

    DiotaPlan is a simulation and automatic robot trajectory planning software that optimizes the automatic choice of observation points according to the pieces to be controlled and the sequencing of trajectories without collision.

    OPTION DISPONIBLE

    Module
    DiotaController

    Software tool dedicated to the execution of the control ranges, DiotaController carries out the supervision of the ranges as well as the automatic control of the robot, of the elements of the cell, and of the phases of capture.

    OPTION DISPONIBLE

    Software
    DiotaInspect

    As a collection of algorithmic operators, DiotaInspect combines a set of automatic control features to detect and characterize nonconformities.

    DiotaSensor ONE

    Hardware
    DiotaSensor ONE

    DiotaSensor ONE is a standalone control sensor specifically designed to offer great flexibility and control capability. Composed of several fields of perception, it allows several functionalities.

    Learn more

    DiotaSensor FLEX

    Hardware
    DiotaSensor FLEX

    DiotaSensor FLEX is a sensor designed to allow fully customized configurations developed by our teams to address specific needs that cannot be perfectly addressed by existing sensors.

    Learn more

     

    Speak to a representative 

    Contact


    Paris : +33 185 41 15 15
    Stuttgart : +49 71 419 909 474

    France

    12 rue des Petits Ruisseaux
    91370 Verrières-le-Buisson
    France

    Germany

    Hermann-Hagenmeyer-Str. 1
    71636 Ludwigsburg
    Germany
    Contact us by email